|Monitors with user selectable setpoint and visual LED alarm|
Milwaukee├s low cost durable meters for quick and reliable measurements.
The Smart monitors are designed to continuously monitor pH, EC or TDS values directly in your reservoir. Its user selectable setpoint allows you to set a visual alarm when the pH, EC or TDS level rises above the setpoint. Features include: user selectable set point, visual LED alarm when values go above (for pH) or below (for EC and TDS) the set point and manual calibration. All these instruments run on a 12V adapter so there├s no need to worry about failed batteries.
Smart monitors are very simple to operate:
1. Hang your monitor above your reservoir
2. Connect the adapter to the meter and plug in the power supply
3. Immerse 2/3 of the electrode in the solution
4. The electrode can now remain there permanently.
Range 0.0 - 14.0 pH
Resolution 0.1 pH
Accuracy ┬▒ 0.2 pH
Calibration Manual 2 points
Set point range 5.5 - 9.5 pH
Alarm Active when reading is higher than set point
Power supply 12 VDC adapter
Dimensions 80 x 145 x 35 mm
Professional monitor for quick and reliable pH measurements
Manual 2 points calibration
Visual LED alarm
Works with 12 VDC adapter
Double junction pH electrode with 2m cable (BNC connector