Rio Seio Super Flow Powerhead Electronic Controller
Rio Seio Super Flow Powerhead Electronic Controller is intended for use with only SEIO water pump models: 1100, 1500, and 2600. THE SEIO CONTROLLER WILL NOT WORK WITH ANY OTHER TYPE OF PUMP.
The controller will control one or two SEIO Super Flow Water Pumps. The pumps can be set to go from low to high; this surge can be set from 15 seconds to 30 minutes. The pumps on low operate at approximately 50% flow and then will ramp up to 100% when on high. There are also two preset feeding buttons at 8 minutes and 16 minutes. Once the time has elapsed the unit will go back to the original preset.