Tunze 7091 Single Controller
The unit is supplied with connection cable for wave simulation with Turbelle electronic powerheads. By means of branch adapter 7092.34, two Turbelle electronic can be operated synchronously. If photo-electric cell 7094.05 (not supplied) is connected up to the socket, the automatic operation in night mode can be activated.
Currents are an energy of life in your aquarium. Turbelle electronic circulation pumps are controlled electronically. TUNZE Aquarientechnik have developed a large range of control accessories to simulate the various current conditions in the sea.
(A) Wide-spread current - Turbelle pumps produce a wide-spread (soft) current.
(B) Wave simulation - The maximum and minimum output as well as the pulse time of the pumps can be set easily separately for the two channels in Multicontroller 7094, and for one channel in Multicontroller 7091.
(C) Foodtimer (7091 + 7094) - The pumps can be switched off by the push of a button. Automatic restart after 8 to 10 minutes.
(D) Operation in night mode - The output of the pumps is reduced during the night. The photo-electric cell 7094.05 required is supplied along with Multicontroller 7094. The photo-electric cell has to be ordered separately for Singlecontroller 7091.
(E) Sequential pump circuit (7094 only) - The pumps are started one after the other, which produces a swelling current. The switching time can be adjusted.
(F) Tide simulation (7094 only) - The pumps are switched on or off alternately. The switching time can be adjusted between 1 minute and 12 hours.